JBL Synthesis SCL-7
The SCL-7 is the smallest traditional in-wall model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a width or surround channel or as an LCR in smaller systems. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. The SCL-7 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.
Highlights
- 2-way in-wall loudspeaker system designed for off-axis listening as LCR and surround channels.
- 1-inch 2410H-2 compression driver tweeter mated to a JBL patented High-Definition Imaging (HDI™) horn precision molded baffle assembly.
- Two 5.25-inch (130mm) Advanced Aluminum Matrix cone cast frame woofers.
- Can be mounted vertically or horizontally.
- Patented Cat Claw installation mechanism.
- Gold plated, spring-loaded binding posts.
- Includes paintable zero-bezel, magnetically attached grilles.
- Compatible with WB52 pre-construction bracket.
Specifications
|
Type |
2-Way In-wall loudspeaker |
|
Low Frequency Driver |
Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4) |
|
High Frequency Driver |
1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver |
|
Recommended Amplifier Power |
25 – 150W RMS |
|
Impedance |
4 Ohm |
|
Loudspeaker Sensitivity |
88 dB/2.83V/1m (2pi anechoic) |
|
Frequency Response |
55Hz - 30kHz (-6 dB on-axis), 2pi anechoic |
|
Crossover Frequency |
2.0 kHz |
|
High Frequency Coverage Angle (-6 dB) |
60° Vertical, 90° Horizontal (Left: 30°, Right: 60°, from center line), from 2kHz to 15kHz |
|
Enclosure Type |
Open back |
|
Controls |
Boundary Proximity Control |
|
Grille Dimensions |
7.32” (186 mm) x 19.15” (486 mm) |
|
Product Dimensions (with grille) |
7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm) |
|
Cut-out Dimensions |
6.18” (157 mm) x 18.03” (458 mm) |
|
Rough-in Bracket |
WB52 |
|
Mounting Depth |
3.64” (93 mm) |
|
Input Type |
Gold-plated spring-loaded binding posts |
|
Product Weight |
12.6 lbs (5.72 kg) |
|
Shipping Weight |
14.6 lbs (6.62 kg) |