GENELEC 5041A
Designed to complement our 4000 series installation speakers, the 5041A is the first in-wall subwoofer to offer truly professional performance.
Key Technologies
- Active Crossovers
- Optimised Amplifiers
- Protection Circuitry
- Room Response Compensation
Precise and dynamic
When installed, all that can be seen of the 5041A is a small, unobtrusive metal grille on the wall. However, its powerful, precise and dynamic bass response right down to 35 Hz will leave you in no doubt about its credentials as a premium quality subwoofer. The 5041A can be mounted in any 16 inch stud bay, with independent brackets ensuring that its slimline enclosure is completely isolated from all surfaces, preventing any potential vibration from being transmitted to the walls of the building.
Get more active
Genelec’s active approach means that the 5041A is powered by an individually calibrated remote-mounted amplifier module, thus avoiding any issues with amplifier/speaker matching. The amplifier can be rack mounted and features Room Response Controls for optimising the bass roll-off and phase of the 5041A to match any acoustic environment - along with Autostart and Remote Control capabilities.
Specifications
| System Specifications | |
| Frequency Response | 35 Hz - 95 Hz (± 3 dB) |
| Low cutoff -6dB | 35 Hz |
| High cutoff -6dB | 95 Hz |
| Peak SPL | ≥110 dB |
| Short term max SPL | ≥105 dB |
| Self-generated noise | ≤15 dB |
| Weight | 15 kg (33.1 lb) |
| Dimensions | |
| Height | 177 mm (6 31/32 in) |
| Width | 54 mm (2 1/8 in) |
| Depth | 260 mm (10 1/4 in) |
| Drivers | |
| Bass | 2 x ⌀ 165 mm Bass2 |
| Diameter : 165 mm (6 1/2 in) | |
| Amplifier Section | |
| 5041A Bass Amplifier (RAM3) | 103 W Class D |
| Power consumption | |
| Mains voltage | 100-240 VAC 50/60Hz |
| ISS Active | ≤0.5 W |
| Idle | ≤12 W |
| Full output | 120 W |
| Signal processing section | |
| Connectors | |
| Input | Analog signal input connector XLR female, balanced 10 kOhm. |
| Analog signal input connector XLR female, unbalanced 10 kOhm. | |
| 2 x Output | Analog signal "LINK OUT" output connector XLR male, balanced 10 kOhm. |