Monitor Audio IWA-250
The IWA-250 switch mode amplifier is a slim, powerful dedicated design in a heavy-duty 1U rack mount case.
Delivering up to 250 watts into 4 ohms, a single IWA-250 will power single or dual IWS-10's to provide higher power levels for larger rooms or to meet customer demands.
Key Features
- Rigid, high quality steel case
- Switch mode power supply
- Class D power amplifier delivering up to 250 watts into 4 ohms (dual IWS-10 drivers)
- High efficiency design resulting in cool running – low thermal output
- DSP controlled with advanced limiters
- <0.5watt standby power consumption (ErP certified)
- DC short circuit protection, over-current and thermal protection
Specification
|
System Format |
Active sub-woofer amplifier |
|
Lower Frequency Limit |
25 Hz |
|
Upper Frequency Limit |
Variable 40 – 120 Hz @ 24 dB/Octave |
|
Amplifier Output |
250 W @ < 1% THD+N |
|
Drive Unit Complement |
4 – 8 ohms |
|
Amplifier Classification |
Class D amplifier with Switch mode power supply (SMPSU) |
|
Cabinet Support |
For use when using the dedicated back box |
|
EQ |
Music/ Movie/ Impact |
|
Phase Control |
0 & 180 degrees |
|
Auto Sensing |
Line Level > 3.5mV |
|
Input Level Requirements |
Standby after approximately 15 minutes if no signal sensed |
|
Input Impedance |
> 20K ohms |
|
Mains Input Voltage |
AC 110 - 120 V ~ 50/60Hz AC 220 - 240 V ~ 50/60Hz (Factory Region Preset) |
|
Dimensions (H x W x D) |
43.7 x 432 x 263 mm (1 3/4 x 17 x 10 3/8) |
|
Connection |
LFE in (Stereo RCA and Balanced), 12v Trigger in (3.5 mm mono mini-jack), left and right speaker output |
|
Trigger Input |
5 - 12v via 3.5 mm mono mini-jack socket |
|
Power Consumption |
Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 200 W |
|
Weight (unpacked) |
4 kg (8 lb 12 oz) |
|
Sold As |
Single Unit |