JBL Synthesis SCL-7 2-Way 5.25" In-Wall Speaker

Rs. 109,990

JBL Synthesis SCL-7

The SCL-7 is the smallest traditional in-wall model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a width or surround channel or as an LCR in smaller systems. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. The SCL-7 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.


  • 2-way in-wall loudspeaker system designed for off-axis listening as LCR and surround channels.
  • 1-inch 2410H-2 compression driver tweeter mated to a JBL patented High-Definition Imaging (HDI™) horn precision molded baffle assembly.
  • Two 5.25-inch (130mm) Advanced Aluminum Matrix cone cast frame woofers.
  • Can be mounted vertically or horizontally.
  • Patented Cat Claw installation mechanism.
  • Gold plated, spring-loaded binding posts.
  • Includes paintable zero-bezel, magnetically attached grilles.
  • Compatible with WB52 pre-construction bracket.



2-Way In-wall loudspeaker

Low Frequency Driver

Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4)

High Frequency Driver

1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver

Recommended Amplifier Power

25 – 150W RMS


4 Ohm

Loudspeaker Sensitivity

88 dB/2.83V/1m (2pi anechoic)

Frequency Response

55Hz - 30kHz (-6 dB on-axis), 2pi anechoic

Crossover Frequency

2.0 kHz

High Frequency Coverage Angle (-6 dB)

60° Vertical, 90° Horizontal (Left: 30°, Right: 60°, from center line), from 2kHz to 15kHz

Enclosure Type

Open back


Boundary Proximity Control

Grille Dimensions

7.32” (186 mm) x 19.15” (486 mm)

Product Dimensions (with grille)

7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm)

Cut-out Dimensions

6.18” (157 mm) x 18.03” (458 mm)

Rough-in Bracket


Mounting Depth

3.64” (93 mm)

Input Type

Gold-plated spring-loaded binding posts

Product Weight

12.6 lbs (5.72 kg)

Shipping Weight

14.6 lbs (6.62 kg)

You may also like

Recently viewed