JBL Synthesis SCL-5 2-way 7" In-Ceiling Speaker

Rs. 184,990

JBL Synthesis SCL-5

The SCL-5 is the highest performance traditional round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-5 features JBL’s patented 2409H 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 7-inch (180mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-5 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in medium to large rooms.


  • 2-way in-ceiling loudspeaker system designed for off-axis listening as height, in-ceiling LCR and surround channels.
  • 1-inch 2409H compression driver tweeter mated to a JBL patented offset High-Definition Imaging (HDI™) horn assembly.
  • 7-inch (180mm) Advanced Aluminum Matrix cone, cast frame woofer with acoustic aperture waveguide baffle.
  • Patented Cat Claw installation mechanism.
  • Gold plated, spring-loaded binding posts.
  • Includes paintable round and square zero-bezel, magnetically attached grilles.
  • Compatible with CB10 pre-construction bracket



2-Way In-ceiling loudspeaker

Low Frequency Driver

7” (180 mm) advanced Aluminum Matrix cone cast-frame woofer (JW180PB-6)

High Frequency Driver

1" (25 mm) 2409H Teonex annular ring-diaphragm compression driver

Recommended Amplifier Power

25 – 125W RMS


6 Ohm

Loudspeaker Sensitivity

86 dB/2.83V/1m (2pi anechoic)

Frequency Response

48Hz - 32kHz (-6 dB on-axis), 2pi anechoic

Crossover Frequency

1575 Hz

High Frequency Coverage Angle (-6 dB)

60-degree Vertical (Up)

Enclosure Type

Open back


Boundary Proximity Control

Grille Dimensions

Round - 12.5" (318 mm) diam.

Grille Dimensions

Square - 12.5" (318 mm) x 12.5" (318 mm)

Product Dimensions (with grille)

12.5" H x 12.5" W x 5.98" D (318 mm x 318 mm x 151.9 mm)

Cut-out Diameter

11.2" (285 mm)

Accessory Rough-in Bracket


Mounting Depth

5.58" (141.8 mm)

Input Type

Gold-plated spring-loaded binding posts

Product Weight

8.6 lb. (3.9 kg), 9.2 lb. (4.2 kg) with one grille

Shipping Weight

12.5 lb. (5.7 kg)


You may also like

Recently viewed