BOSE SUB2 Powered Bass Module
A powered, portable bass module, the Sub2 subwoofer combines with virtually any portable PA and delivers low-end performance down to 37 Hz. Its unique 10” × 18” high-excursion neodymium RaceTrack driver allows for an ultra-slim enclosure, delivering performance that rivals traditional round drivers without the cumbersome size, freeing up room in your vehicle and on the stage. Compared to the Sub1 subwoofer, Sub2 is the more powerful subwoofer option for the Bose L1 Pro32 system, combining seamlessly via single-cable SubMatch connectivity. You can stack multiple Sub2 subwoofers for even more low end — or to unleash Cardioid Mode for directional bass. With a Sub2, you get a subwoofer that easily fits onstage — and effortlessly fills up the dance floor.
Pair with other powered loudspeakers via line input and output with selectable crossover modes, plus integrated threaded pole mount for use with Bose S1 Pro PA and more.
MEET THE HIGH END OF LOW FREQUENCY
Give your songs full impact. Sub1 and Sub2 powered bass modules combine with virtually any portable PA to deliver low end down to 40 Hz and 37 Hz, respectively. When paired with the Bose L1 Pro32, Sub1 creates a more compact system, while Sub2 plays lower and louder. And both give you bold bass from slim design that goes virtually anywhere.
More bass. Less bulk. With a unique RaceTrack driver design, Sub1 and Sub2 offer powerful bass and an optimized center of gravity. The driver’s shape allows the physical enclosure of Sub1 and Sub2 to be slimmer without compromising sound. This frees up room in your vehicle and on the stage, and makes every carry in between — home to car, vehicle to venue — much easier.
Part of a full system Sub1 and Sub2 pair seamlessly with the L1 Pro32 via proprietary SubMatch connectivity to form a modular line array system that’s easy to pack, carry, and set up. This single-cable connection makes setup so much easier. It allows the system’s crossover and EQ to automatically calibrate for optimal sound, and — because power and digital audio are passed through the SubMatch cable — you only need a single power outlet. Just plug in your L1 Pro32 and you’re ready to go.
|System Type||Self-powered bass module|
|Frequency Response (–3 dB)||37 Hz to 180 Hz|
|Frequency Range (–10 dB)||29 Hz to 260 Hz|
|Nominal Vertical Coverage Pattern||0°|
|Nominal Horizontal Coverage Pattern||Omnidirectional (with –10 dB rear rejection in Cardioid mode)|
|Calculated Maximum SPL @ 1 m, continuous||123.8 dB|
|Calculated Maximum SPL @ 1 m, peak||129.8 dB|
|Low Frequency||1 × RaceTrack low-frequency driver 10" × 18"|
|Low Frequency Voice Coil Size||3"|
|Driver Protection||Dynamic limiting|
|Low Frequency Amp Channel||1000 W|
|Channel 1 & 2 Input: Audio Type||Combination XLR or 1/4" TRS connector (mic/instrument/line)|
|Channel 1 & 2 Input Input Impedance||100 KΩ|
|Channel 1 & 2 Input Channel Gain||+10 dB to +45 dB; from input to driver, controlled by volume control|
|Channel 1 & 2 Input Max Input Signal||+24 dBu|
|Channel 1 & 2 Output: Audio Type||XLR connector, line-level, full-frequency bandwidth|
|SubMatch Input: Audio Type||Bose proprietary multi-pin cable|
|SubMatch Thruput: Audio Type||Bose proprietary multi-pin cable|
|LED Indicators||Standby, Phase/Pattern selection, Input EQ selection, Output EQ selection, Signal/Clip Indicator|
|AC Power Input||100–240 VAC (±20%, 50/60 Hz)|
|Input Electrical Type||IEC, SubMatch|
|Initial turn on inrush current||15.2 A at 120 V; 28.6 A at 230 V|
|Inrush current after AC mains interruption of 5 s||2.6 A at 120 V; 6.1 A at 230 V|
|Enclosures Material||High-impact polypropylene, birch plywood|
|Grille Material||Powder-coated perforated steel|
|Product Dimensions (H × W × D)||694 × 317 × 551 mm (27.3 × 12.5 × 21.7 in)|
|Shipping Dimensions (H × W × D)||660 × 385 × 790 mm (25.98 × 15.16 × 31.10 in)|
|Net Weight||23.0 kg (50.7 lbs)|
|Shipping Weight||27.7 kg (61.0 lbs)|
|Included Accessories||IEC power cord, slip cover|
|Optional Accessories||Sub2 Roller Bag, Adjustable Speaker Pole, SubMatch Cable|